HYOSUNG Aquila 250 Service Manual page 172

◉ INSPECTION
Inspect the rear shock absorber for damage and oil
leakage. If any defects are found, replace the rear shock
absorber with a new one.
CAUTION
Do not attempt to disassemble the rear shock
absorber. It is unserviceable.
◉ REMOUNTING
● Install the rear shock absorber and tighten the nuts to
the specified torque.
Shock absorber mounting nut (upper)
Shock absorber mounting nut (lower)
◉ SPRING PRE-LOAD ADJUSTMENT
● Adjust the rear shock absorber spring pre-load.
Rear shock absorber
spring length
Rear shock absorber
spring pre-load
: 20~30 N∙m (2.0~3.0 kg∙m)
: 35~55 N∙m (3.5~5.5 kg∙m)
Standard
199.8 mm
Standard
1/5 position
②
① Rear shock absorber
CHASSIS 6-44
①
② Pin spanner