Management Ip - Huawei Quidway WA1003A User Manual

consistent with the Management IP address of
WA1003A. Normally the Start IP address is one
greater than the Management IP address.
End IP: Type in the last address of the continuous IP
address range to be used by WA1003A for DHCP
function. Up to 253 consecutive IP addresses are
available for the pool.
Lease Time: This specifies the amount of time (in
hours) a client can lease an IP address, from the
dynamically allocated IP pool.
Server off: Select this option to disable DHCP services. In
this case, the IP address of ADSL router device shall be
assigned manually or received from the DHCP server of
LAN or ISP.
III. Save
Click Apply to save the settings in the RAM.
To save these changes permanently, select Tools >
System Commands, and then click Save All.

4.3.2 Management IP

The IP address of WA1003A can be changed to meet the
requirements of your LAN. Remember, if you are using DHCP from
WA1003A, the IP address must be consistent with the DHCP IP
settings.
Enter the Setup menu and click Management IP in the wizard
column to open the Management IP page.
Huawei Technologies Proprietary
19