Huawei Quidway WA1003A User Manual page 40

Click New Connection under WAN Setup to display the
Connection Setup configuration menu. Select Static in the Type
drop-down list to enter the Static Connection Setup page.
Figure 4-11 Configure Connection – Static
Name: Type in a Name for the connection, such as PVC0.
Type: Select Static from the drop-down list.
Options: Enable NAT and/or Firewall by selecting
corresponding check boxes.
Encapsulation: The Encapsulation values LLC (SNAP)
and VC (MUX) are two different methods for encapsulating
the PPP packet. Contact your ISP to make sure the
supported encapsulation.
VPI&VCI: If prompted to change the VPI or VCI values,
type in the values given by your service provider. You may
Huawei Technologies Proprietary
30