User Management - Huawei Quidway WA1003A User Manual

II. Parameters eaplanation
Log Level: Select the Log Level from the drop-down
menu. The levels available are: Alert, Critical, Debug, Error,
Info, Notice, Panic and Warning.
Add an IP Address: Enter the IP address of a receiver for
the log message in the Add an IP Address field and click
the Add button.
Select a logging Destination: Log message receivers
that are added appear listed in the Select a logging
destination drop-down menu. These may be used at any
time for other types of log messages. To delete a log
message receiver from the list, select it and click Delete.
III. Save
Click Apply to save the settings in the RAM.
To save these changes, select Tools > System
Commands, and click Save All.

4.5.3 User Management

Click User Management from the Tools menu to display the
User Management page.
You need to change the administrator information for the
WA1003A before or immediately after establishing a link to the WAN.
Huawei Technologies Proprietary
64