Igmp Management - Huawei EG860 Series User Manual

EG860
User Guide
l IP address: indicates the
l MASK: indicates the subnet mask.
l Packet Filter Id: indicates the identifier of packet filter.
l Precedence: indicates the priority of the relative packet filter.
l Protocol Id: ranges from 0 to 255 and is configured as required.
l Local port and Remote port: range from 0 to 65535 and are configured as required.
l CID: indicates the channel identifier.
Step 4 Click Submit.
----End
Example
Table 7-2
Table 7-2 Typical QoS parameter settings for EG860
Service
Type
High-
definition
camera
Standard-
definition
camera
Checkpoin
t

7.2.10 IGMP Management

This page presents how to configure Internet Group Management Protocol (IGMP).
Context
The multicast mode includes the dynamic multicast mode and static multicast mode. In dynamic
multicast mode, the query interval depends on the number of NEs. The more the NEs, the longer
the query interval. A maximum of 32 records can be configured to static multicast.
Procedure
Step 1 Choose General Settings > IGMP Management. The IGMP Management page is displayed.
Step 2 Configure IGMP Management.
IGMP Proxy can be set to Enable as required.
Issue 02 (2015-04-10)
dedicated bearers.
provides the typical
CID
2
3
4
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
IPv4 address. Packets can be transmitted this
QoS parameter settings for EG860.
QCI DLGBR
(kbit/s)
4 1024
4 1024
6 -
IP address by using
ULGBR DLMBR
(kbit/s) (kbit/s)
2688 10240
1152 10240
- -
7 Reference
ULMBR
(kbit/s)
10240
10240
-
89