I. Configuration page
Figure 4-14 Modem Setup menu
If instructed by your ISP to change the Modulation type for your
service, select the desired modulation type. The available
modulation types are MMODE, T1413, GDMT, GLITE, ADSL2 and
ADSL2Plus. By default, WA1003A will automatically detect the
modulation used; this setting is listed as MMODE (Multi-mode).
II. Save
Click Apply to save the settings in the RAM.
To save the changes permanently, select Tools > System
Commands page, and then click Save All.
Huawei Technologies Proprietary
36