Huawei Quidway WA1003A User Manual page 41

just use the default settings. See the attached table for all
VPI&VCI default values of PVCs.
QoS: You can select UBR, CBR and VBR from the
drop-down list, but it is suggested to leave the default
values if you are unsure or the ISP did not provide this
information.
PCR&SCR/IP Address/Mask/Default GW/DNS: Based
on the information provided by your ISP, enter the IP
Address, Subnet Mask, Default Gateway (if provided), and
DNS values (if provided).
Mode: Select the desired Mode, Bridged or Routed.
V. DHCP
Dynamic Host Configuration Protocol (DHCP) allows the
gateway to obtain the IP address automatically from a DHCP server
on the service provider's network. The service provider assigns a
global IP address from an available address pool. Typically the IP
address assigned has a long lease time, so it will likely be the same
address each time WA1003A requests an IP address.
Click New Connection under WAN Setup to enter the
Connection Setup configuration menu. Select DHCP in the Type
drop-down list to display the DHCP Connection Setup page.
Huawei Technologies Proprietary
31