Idle Timeout/Keep Alive/MAX Fail/MTU: It is suggested
to leave the default values if you are unsure or the ISP did
not provide this information.
On demand: If this option is selected, WA1003A will
automatically connect the Internet while data request is
received.
III. Bridge
"Bridge" means a pure bridged connection with no IP address
assigned to WA1003A. This connection method makes WA1003A
act as a bridge, and just passes packets across the DSL port. When
the device is used in this manner, install additional connection
software on any computer or server to access the Internet.
Click New Connection under WAN Setup to enter the
Connection Setup configuration menu. Select Bridge in the Type
drop-down list to display the Bridged Connection Setup page.
Figure 4-10 Configure Connection – Bridge
Huawei Technologies Proprietary
28