Aastra 480i Administrator's Manual page 90

IP Phone Administrator Guide
Advanced Network Settings
Aastra Web UI
Step Action
3 Enter an IP address or qualified domain name in the "Time Server 1", "Time Server 2", and/or
"Time Server 3" field(s) to specify the location of the NTP time server.
Note: To enable/disable time serving, set the time/date format, and set the time zone, see
Server Settings" on
4 Click
Setting Time/Date on IP Phones
In addition to enabling/disabling the time server, you can also set the time and
date, set the time and date format, set the time zone, and set daylight savings time
on the IP phones. You configure these features using the configuration files, the IP
Phone UI, or the Aastra Web UI. The following table identifies which method of
configuration applies to each feature.
Feature
Set Time
Set Time Format
Set Date
Set Date Format
Set Time Zone
Set Daylight Savings Time
Use the following procedures to set a time and date, time and date format, time
zone, and daylight savings time on the IP phones.
Configuration Files
For specific parameters you can set in the configuration files, see Appendix A, the section,
Settings" on page A-25.
4-34
DFW Phone 972-992-4600
page A-23. These parameters can be set using the configuration files only.
to save your changes.
Method of configuration
IP Phone UI
IP Phone UI
Configuration Files
IP Phone UI
IP Phone UI
Configuration Files
IP Phone UI
Configuration Files
IP Phone UI
Configuration Files
41-001129-00 Rev 09, Release 1.4.1
"Time
"Time and Date