Aastra 480i Administrator's Manual page 222

IP Phone Administrator Guide
Operational Features
Configuring the SIP Local Dial Plan
Use the following procedures to configure the SIP Local Dial Plan using the
configuration files or the Aastra Web UI.
Configuration Files
For specific parameters you can set in the configuration files, see Appendix A, the section,
Plan Settings" on page A-32.
Aastra Web UI
1 Click on Basic Settings->Preferences.
2 In the "Local Dial Plan" field, enter a valid local dial plan (up to 127 alphanumeric characters) for the
IP phone. Default is X+#|XX+*. Enter prepended digits as required.
3 Enable the "Send Dial Plan Terminator" field by checking the check box. (Disable this field by
unchecking the box). Default is disabled.
4 In the "Digit Timeout (in seconds)" field, enter a timeout value. This is the length of time the phone
waits before dialing. Default is 4 seconds.
5 Click
You must restart your IP phone for the changes to take affect.
5-110
DFW Phone 972-992-4600
to save your changes.
"SIP Local Dial
41-001129-00 Rev 09, Release 1.4.1