Aastra 480i Administrator's Manual page 107

Configuring the IP Phones
Advanced Network Settings
Aastra IP phones support the International Telecommunications Union (ITU)
transmission standards for the following CODECs:
• Waveform CODECs: G.711 pulse code modulation (PCM) with a-Law or
u-Law companding
• Parametric CODEC: G.729a conjugate structure - algebraic code excited
linear prediction (CS_ACELP).
All Codecs have a sampling rate of 8,000 samples per second, and operate and
operate in the 300 Hz to 3,700 Hz audio range. The following table lists the
default settings for bit rate, algorithm, packetization time, and silence suppression
for each Codec, based on a minimum packet size.
Default Codec Settings.
CODEC
G.711 a-law
G.711 u-law
G.729a
You can enable the IP phones to use a default "basic codec" set, which consists of
the set of codecs and packet sizes shown above.
Or you can instead configure a custom set of codecs and attributes instead of using
the defaults.
41-001129-00 Rev 09, Release 1.4.1
DFW Phone 972-992-4600
Bit Rate Algorithm
64 Kb/s PCM
64 Kb/s PCM
8 CS-ACELP
Kb/s
Note: The basic and custom codec paramters apply to all calls, and are
configured on a global-basis only using the configuration files or the
Aastra Web UI.
Packetizatio Silence
n Time Suppression
30 ms enabled
30 ms enabled
30 ms enabled
4-51