Aastra 480i Administrator's Manual page 84

IP Phone Administrator Guide
Advanced Network Settings
Configuring VLAN (optional)
Use the following procedures to configure VLAN on the IP phone.
Configuration Files
For specific parameters you can set in the configuration files, see Appendix A, the section,
Area Network (VLAN) Settings"
IP Phone UI
Step Action
1 For 9112i/9133i:
I
Press on the phone to enter the Options List.
For 480i/480i CT:
Press % on the phone to enter the Options List.
2 Select Network.
3 Select VLAN.
To globally enable/disable VLAN and set priority for non-IP packets:
4 Select VLAN Enable, and press Change to set VLAN Enable to Yes (or No to disable)
5 Press Done to save the changes.
6 Select Phone.
7 Select Priority.
8 Select Other and enter a non-IP priority value from 0 to 7 for non-IP packets.
9 Press Done to save the changes.
10 Press Done again to return to the VLAN Phone menu.
To set VLAN ID and priority for Port 0:
4-28
DFW Phone 972-992-4600
Note: VLAN is disabled by default. When you enable VLAN, the IP
phones use the default settings for each VLAN parameter. You can
change the default settings if required using the following procedure.
on page A-18.
"Virtual Local
41-001129-00 Rev 09, Release 1.4.1