Aastra 480i Administrator's Manual page 233

Operational Features
Operational Features
Configuring Ring Tones and Tone Sets
Use the following procedures to configure ring tones and tone sets on the IP
phones.
Configuration Files
For specific parameters you can set in the configuration files for ring tones, see Appendix A, the section,
"Ring Tone and Tone Set Global Settings"
IP Phone UI
Step Action
For global configuration only:
1 For 9112i/9133i:
I
Press on the phone to enter the Options List.
For 480i/480i CT:
Press % on the phone to enter the Options List.
2 Select Tones.
3 Select Set Ring Tone.
4 Select the type of ring tone (Tone 1 through Tone 5, or Silent).
For 9112i/9133i:
Press Set.
For 480i/480i CT:
Press Done.
41-001129-00 Rev 09, Release 1.4.1
DFW Phone 972-992-4600
on page A-72 or "Ring Tone Per-Line Settings" on page A-73.
5-121