Aastra 480i Administrator's Manual page 70

IP Phone Administrator Guide
Configuration Server Protocol
Aastra Web UI
Step Action
2 Select the protocol from the "Download Protocol" list box.
The IP phone uses the protocol you select to download new firmware and configuration files from the
configuration server. Use the following table to configure the applicable server.
TFTP
- Enter an IP address or qualified domain name in the "TFTP Server" field.
Optional: You can also configure an alternate TFTP server if required. If "Use Alternate
TFTP" is enabled, you must also enter an IP address or qualified domain name for the
alternate server in the "Alternate TFTP" field.
FTP
- Enter an IP address in the "FTP Server" field.
Optional: You can enter a username and password for accessing the FTP server if
required.
- Enter a user name for a user that will access the FTP server in the "FTP User Name" field.
- Enter a password for a user that allows access to the FTP server in the "FTP Password"
field.
HTTP
- Enter an IP address in the "HTTP Server" field.
- Enter a root sub-directory path for the HTTP server in the "HTTP Path" field.
Optional: You can enter a list of users to be authenticated when they access the HTTP
server in the "HTTP POST Authentication List" field.
3 Click
Note: The session prompts you to restart the IP phone to apply the configuration settings.
4 Select Operation->Reset and click
4-14
DFW Phone 972-992-4600
to save your settings.
..
41-001129-00 Rev 09, Release 1.4.1