Aastra 480i Administrator's Manual page 48

Sip ip phone release 1.4.1
Hide thumbs Also See for 480i:
Table of Contents

Advertisement

IP Phone Administrator Guide
Administrator Level Options
Type of Service (ToS), DSCP
Network settings also allows you to set Type of Service (ToS) and Differentiated
Services Code Point (DSCP).
Reference
For more information about ToS and DSCP see Chapter 4, the section,
Service (ToS), Quality of Service (QoS), and DiffServ QoS"
VLAN
You can enable or disable VLAN and set specific VLAN IDs and priorities under
Network Settings.
Reference
For more information about VLAN, see Chapter 4, the section,
(optional)"
SIP Settings
The following paragraphs describe the SIP parameters you can configure on the IP
phone. SIP configuration consists of configuring:
Basic SIP Authentication Settings
Basic SIP Network Settings
Advanced SIP settings
RTP Settings
3-14
DFW Phone 972-992-4600
on
page 4-22.
Note: Specific parameters are configurable using the Aastra Web UI only
and are indicated where applicable. If you have a proxy server or have a
SIP registrar present at a different location than the PBX server, the SIP
parameters may need to be changed. The SIP parameters can be set on a
global or per-line basis.
"Type of
on
page 4-23.
"Virtual LAN
41-001129-00 Rev 09, Release 1.4.1

Advertisement

Table of Contents
loading

This manual is also suitable for:

480i ct9112i9133i

Table of Contents