Aastra 480i Administrator's Manual page 83

Configuring the IP Phones
Advanced Network Settings
.
Aastra Web UI
Step Action
1 Click on Advanced Settings->Network->Type of Service,DSCP.
2 Choose a Protocol (SIP, RTP, and/or RTCP), and enter a value from 0 to 63.
Note: If you change the ToS/DSCP setting for a Protocol, and VLAN is enabled, you will need to map
the applicable priority to the Protocol setting as shown in the table
page 4-28 For more information, see the section
3 Click
Note: The session prompts you to restart the IP phone to apply the configuration settings.
4 Select Operation->Reset and click
41-001129-00 Rev 09, Release 1.4.1
DFW Phone 972-992-4600
"Configuring VLAN (optional)"
to save your settings.
..
"DSCP Range/VLAN Priority"
on page 4-28.
on
4-27