Radiator Installation; Thermostat Removal; Thermostat Inspection - Suzuki RG250 Service Manual

3. Road dirt or trashes stuck to the fins must be
removed. Use of compressed air is recommend-
ed for this cleaning. Fins bent down or dented
can be repaired by straightening them with
the blade of a small screwdriver.
4. Any water hose found in cracked condition or
flattened must be replaced.
INSTALLATION
The radiator is reinstalled in the reverse order
of the removal procedure. After installing the
radiator, be sure to add cooling water: refer to
page 2-9 for refilling information.
THERMOSTAT
REMOVAL
• Take off the frame covers, seat and the fuel
tank.
• Drain the coo lant.
• Remove the thermostat cover
CD .
INSPECTION
Inspect the thermostat pellet for signs of cracking.
COOLING SYSTEM 4-4