Master Cylinder Inspection; Master Cylinder Reassembly - Suzuki RG250 Service Manual

INSPECTION
• Inspect the master cylinder bore for any
scratches or other damage.
• Inspect the piston surface for scratches or other
damage.
• I "SPect the primary cup and dust boot for wear
or damage.
REASSEMBLY
Reassemble and remount the master cylinder in the
reverse order of disassembly and removal, and also
carry out the fol lowing steps:
I
CAUTION:
Wash the master cylinder components with
fresh brake fluid before reassembly, Never
use cleaning solvent or gasoline to wash them.
Apply brake flu id to the cylinder bore and all
I
the internals to be inserted into the bore.
~
When remounting the master cylinder on the
handlebars, first t ighten the clamp bolt for upside
as shown.
CAUTION :
----:--l
Bleed the air after reassembling master cylin·
der (See page 2-151 _
Adjust the front brake light switch after in-
stallation_
CHASSIS 7·10
•
Upper
t