Rear Brake Caliper Construction; Rear Brake Caliper Removal; Rear Brake Caiper Disassembly - Suzuki RG250 Service Manual

)·35 CHASSIS
CALIPER
CONSTRUCTION
REMOVAL
• Remove the union bolt and catch the brake
fluid in a suitable receptacle.
• Pull out the cotter pin and remove the torque
link bolt and nut.
• Remove the caliper mounting bolts and take off
the caliper.
NOTE:
Slightly loosen the caliper housing bolts to
facilitate later disassembly before loosening
the caliper mounting bolts.
OISASSEMBL Y
• Remove the pad . (Refer to page 7·34 )
,.
•
o