•
Draw
out
the axle
shaft.
•
Remove the front
wheel.
DISASSEMBLY
•
Remove
the securing bolts and separate the disc
from
wheel.
Drive out the right and left wheel bearings by using
the special tool in
the
fol lowing procedures.
•
Insert the
adapter into the wheel bearing.
•
After inserting the wedge bar from the opposite
side,
lock
the wedge bar in the slit of the adapter.
•
Drive out the wheel bearing by knocking the
wedge bar.
CAUTION
:
The removed bearing
should be replaced.
09941
-50110
Bearing remover
CHASSIS
7·12