Controls; Ignition Switch; Ignition Key - HYOSUNG GV250 Ei Owner's Manual

CONTROLS

IGNITION SWITCH

STEERING
LOCK
The ignition switch has three positions :
"ON" POSITION
The ignition circuit is completed and the
engine can now start.
The key cannot be removed from the
ignition switch in this position.
"OFF" POSITION
All electrical circuits are cut off.
The engine will not start.
The key can be removed.
"LOCK" POSITION
STEERING
LOCK
KEY
KEY
22
To lock the steering :
Turn the handlebars all the way to the
left.
Turn the ignition key to the "OFF"
position.
Push down the ignition key from the
"OFF" position, come up again and
turn it to the "LOCK" position
Remove the ignition key.
WARNING
Turning the ignition switch to the
OFF or LOCK position while the
motorcycle is moving can be hazardous.
Moving the motorcycle while the
steering is locked can be hazardous.
You could lose your balance and fall, or
you could drop the motorcycle.
Stop the motorcycle and place it on the
side stand or center stand if equipped
before locking the steering. Never
attempt to move the motorcycle when
the steering is locked.

IGNITION KEY

These motorcycles come equipped with
two ignition keys.
Keep the spare key in a safe place.