HYOSUNG GV250 Ei Owner's Manual page 28

RESET SWITCH
Use this switch to adjust the following :
In the normal mode
Push it for
Odometer Trip meter
0.6 ~ 1
Trip meter
seconds
Odometer
In the trip meter mode
Push it for
Reset the trip meter to zero,
2 seconds while the display indicates trip
meter
In the clock reset mode
Push it for
0.6 ~ 1
Increase the minutes of clock
seconds
Adjustment
Clock
B
Adjustment
or
A B
Adjustment
"FI"(Fuel Injection) CHECK LAMP
Only for
It comes on for about three seconds
whenever the ignition switch is set to
"ON" position with the engine stopped as a
test of injection system operation.
The red "FI" check lamp "
A
off after three seconds.
If the "FI" check lamp comes on during
normal engine operation, it means that
the electric fuel injection system is not
operating correctly. When this is the
case, stop the engine immediately and
contact a Hyosung authorised dealer.
Riding the motorcycle with "FI" check
lamp lit can damage the engine and
transmission.
27
CAUTION
" must go