HYOSUNG GV250 Ei Owner's Manual page 61

CAUTION
Do not remove absolutely the airtight
cover as the airtight type battery.
Keep after separate at the motorcycle
for the minimum of self electric
discharge and electric leakage when
don't use for a long time.
Remove the
when keep intact at the motorcycle.
WARNING
Never invert the battery cables.
Ensure that the ignition switch is in
position "OFF" before connecting or
disconnecting
otherwise some components might
damage.
CHECK AND CLEAN OF
BATTERY TERMINAL
Clean the battery terminal when it is dusty
or rusted.
1. Set the ignition switch "OFF" position.
2. Remove the right frame cover.
3. Check that battery lead wire and
terminal.
4. If necessary : disconnect the negative
battery wire first, then disconnect the
positive battery wire.
Remove the battery.
5. Clean the terminal.
If there is white dust, clean it with warm
water.
6. Connect the battery wires and grease
the terminal lightly.
When reinstalling the battery, be sure to
connect the positive
then connect the negative
wire.
negative terminal
the battery,
battery wire first,
battery
Keep the battery away from fires.
When disconnecting the battery wire,
be sure to remove the negative
battery wire first with the ignition
switch "OFF" position, then remove
the positive
When reinstalling the battery, be sure
to connect the positive
wire first, then connect the negative
battery wire.
Fasten certainly the battery wires.
Incorrect installation of the battery
will reverse the terminal position
resulting in possible electrical
system damage due to incorrect
battery lead connection.
The red lead wire must go to the
positive
black with white tracer) lead wire
must go to the negative
Never charge a battery while still in
the machine as damage may result
to the battery or regulator / rectifier.
60
CAUTION
battery wire.
terminal and the black (or
terminal.
battery