Controls; Ignition Switch; Ignition Key; Instrument Panel - HYOSUNG Aquila Owner's Manual

CONTROLS

IGNITION SWITCH

The ignition switch has three positions:
◉ OF슴 POSITION
All electrical circuits are cut off.
The engine will not start. The key can be removed.
◉ ON POSITION
The ignition circuit is completed and the engine
can now be started. The key cannot be removed
from the ignition switch in this position.
◉ LOCK POSITION
To lock the steering, turn the handlebar all the
way to the left. Push down and turn the key to
the LOCK position and remove the key. All
electrical circuits are disconnected.

IGNITION KEY

This motorcycle comes equipped with a pair of
identical ignition keys. Keep the spare key in a
safe place.
Your motorcycle ignition keys are stamped with
an identifying number. This number is used
when making replacement keys. Please write
your key number in the box provided for your
future reference.
Key number:
KEY

INSTRUMENT PANEL

TRIP METER
The trip meter is a resettable odometer located
in the speedometer assembly. It can be used to
indicate the distance traveled on short trip or
between fuel stops. Pressing control button will
return the meter to zero.
ODOMETER
The odometer registers the total distance that
the motorcycle has been ridden.
SPEEDOMETER
The speedometer indicates the road speed in
kilometers and miles per hour.
FUEL GAUGE
The E (Empty) mark indicates the fuel tank is
empty or nearly so. The F (Full) mark indicates
the fuel tank is full.
TACHOMETER
The tachometer indicates the engine speed in
revolutions per minute(r/min).
TURN SIGNAL INDICATOR LAMP
When the turn signals are being operated either
to the right or to the left, the indicator will flash at
the same time.
NEUTRAL INDICATOR LAMP
The neutral indicator lamp will come on when
the transmission is in neutral.
9