HYOSUNG GV250 Ei Owner's Manual page 26

Mode Switch
Clock
Select ( )
Select ( )
Clock
reset
Reset ( )
mode
Select ( )
The clock indicates 24-hour mode.
Follow the procedure below to adjust the
clock.
1. Push the switch
for 2 seconds until the hour, minutes
and seconds display blink.
It is the clock reset mode.
2. Adjust the hour display by pushing the
switch (in the clock reset mode) for
0.6 ~ 1 seconds.
3. Adjust the minutes display by pushing
the switch (in the clock reset mode)
for 0.6 ~ 1 seconds.
4. Push the switch
mode) for 2 seconds to resume in the
clock mode.
CLOCK ADJUSTMENT
Push it for
2 seconds
0.6 ~ 1 seconds
0.6 ~ 1 seconds
2 seconds
(in the clock mode)
(in the clock reset
Clock mode
Increase the hour of clock
Increase the minutes of clock
Clock reset mode
FUEL METER
meter are LCD (Liquid Crystal Display)
type, it indicates the remaining fuel amount
in the fuel tank.
The fuel meter displays all 7 segments
when the fuel tank is full.
[The "F"(Full) mark indicates the fuel tank
is full.
The "E"(Empty) mark indicates the fuel
tank is empty or nearly so.]
The " " mark flickers when the
remaining fuel is approximately 2
Fill the fuel tank before the "
flickers.
The fuel tank capacity is 14
When the "
should add fuel to the fuel tank at the
first opportunity to avoid running out of
fuel.
25
Adjustment
Clock reset mode
Clock mode
&
.
CAUTION
" mark flickers, you
's fuel
" mark