HYOSUNG GV250 Ei Owner's Manual page 25

The odometer registers the total distance
that the motorcycle has been ridden.
The two trip meters are resettable
odometer.
They can register two kinds of distance at
the same time. For instance, trip meter A
can register the trip distance and trip meter
B can register the distance between fuel
stops.
To change the display, push the switch
(in the normal mode) for 0.6 ~ 1 seconds
while the display indicates the odometer,
trip meter A , trip meter B or clock you
want to change.
Odometer
Trip meter A
Trip meter B
Clock
To reset the trip meter to zero, push the
switch (in the trip meter mode) for 2
seconds while the display indicates trip
meter A or B you want to reset.
The odometer and trip meter is
expressed by kilometers or miles.
To change the odometer and trip meter's
unit :
1. Turn the ignition switch to the "ON"
position.
2. Pushing the switch
mode), turn the igniton switch to the
"OFF" position and turn to the "ON"
position again.
3. Push the switch
mode) for 5 seconds continually until
the odometer and trip meter's unit
change.
24
(in the normal
(in the normal