Table of Contents
Advertisement
CAUTION
Don't replenish with brake fluid over
the limit line. It will leak out of the
brake fluid reservoir.
Be careful not to allow dusts or water
to go inside when it is replenished.
Don't use the unrecommended brake
fluid.
Brake fluid can damage severely the
plastics or rubbers. When it is spilt on
the parts, wipe them up immediately.
5. Fasten the cap.
Front brake lamp switch
The front brake lamp switch is located
beneath the front brake lever. Loosen the
switch fitting screws and adjust the timing by
moving the switch body forward or
backward.
REAR BRAKE
Rear brake adjustment
WARNING
Too much clearance in the rear brake
pedal can cause poor braking
performance and may lead to an
accident.
Too little clearance may force brake
shoes to rub against the drum at all
times, causing damage to the shoes and
the drum.
Follow the steps in this section to adjust
the rear brake pedal properly.
Adjust the free travel
(0.79 ~ 1.18 in) by screwing in or out the
brake cable adjust nut
73
20 ~ 30
(0.79 ~ 1.18 in)
to 20 ~ 30 mm
.
Hide quick links:
Advertisement
Table of Contents
