Charging The Terminal Battery - Symbol PDT 8000 Series Product Reference Manual

PDT 8000 Series Product Reference Guide
4. Replace the battery door, hooking it onto the bottom of the compartment and then
pressing down firmly along the top edge while rotating the latches on the battery
door down into the locked position.
Note: Ensure that the latches on the battery door are in the up position
while securing the battery door on the terminal.
Do not expose the battery to temperatures in excess of 140°F (60°C). Do
not disassemble, incinerate, or short circuit the battery.

Charging the Terminal Battery

Before using your terminal for the first time, charge the lithium-ion battery in the terminal for
approximately four hours, using the Serial Charging Cable or an appropriate accessory.
Your terminal is equipped with a memory backup battery which automatically charges from
the fully-charged lithium-ion battery. This backup battery retains data in memory when the
terminal's battery is removed, and can take up to 20 hours to charge when you first use your
terminal.
Note: If you remove your lithium-ion battery before the backup battery is
fully charged, data may be lost. For this reason, DO NOT remove the
battery before the backup battery is fully charged, which can take up
to 20 hours.
1-8
Caution