Using The Single-Slot Cradle - Symbol PDT 8000 Series Product Reference Manual

PDT 8000 Series Product Reference Guide

Using the Single-Slot Cradle

To charge the terminal's battery using the CRD8000-1000S or the CRD8000-1000M:
1. Connect the cradle to a power source.
AC Line
Cord
2. Insert the terminal into the cradle. The terminal starts to charge automatically.
The terminal charge LED blinks amber to indicate that the terminal battery is charging and
turns solid amber when charging is complete. The battery usually charges in two hours or
less, but may take up to four hours to fully charge. See
16 for other indications.
1-12
Power
Supply
Terminal
Charge LED
Charge LED Indicator
DC
Cable
on page 1-