Scanning Data Fields
After a bar code is scanned, the following data appears in the screen:
•
Data displays the data encoded in the scanned bar code.
•
Type indicates the hex type scanned.
•
SRC indicates the scanner being used, and the bar code type scanned
(e.g., Code 128).
•
Time displays the time the bar code was scanned.
•
Len indicates the number of digits in the bar code.
Scanning Options
The following options are available in the Scan screen:
•
Scan provides an alternative to the trigger buttons on the terminal.
•
View displays the bar code content in a separate screen.
•
Params is used to change scanning parameter options, such as:
•
beep time (length of decode beep)
•
beeper frequency (tone)
•
LED-on time (length of time LED remains on upon decode)
•
Code ID (AIM, Symbol)
•
Wav File (sound of decode beep).
•
Codes selects the code types the terminal is able to decode, and sets the options
for each code type.
•
Cancel closes the Scan screen.
Demo Program
B-3