Using The Snap-On Autocharger - Symbol PDT 8000 Series Product Reference Manual

Using the Snap-On Autocharger

To charge the terminal's battery using the Snap-On Autocharger, setup as shown below:
Power
Indicator
Green
The terminal charge LED blinks amber to indicate that the terminal battery is charging and
turns solid amber when charging is complete. The battery usually charges in two hours or
less, but may take up to four hours to fully charge. See
16 for other indications.
1
Terminal
Charge LED
Charge LED Indicator
Getting Started
2
on page 1-
1-11