Symbol PDT 8000 Series Product Reference Manual page 85

With the above setup completed, you can use your modem connection to synchronize data
between your terminal and a host computer (see
can connect to the Internet (see
Available Country Codes
The modem defaults to operation with US telephone networks (country code: B5). To
operate the modem with other country telephone networks, you must set the Country Code
by entering the Country of Installation command. The modem will adjust it's operating
parameters to comply with the telephone network in the country specified.
Syntax used: +GCI=<country_code>;
Supported countries and there codes are:
Country
Austria
Belgium
Brazil
Canada
Denmark
Finland
France
Germany
Note: It is highly recommended that you use FD where possible. If you have trouble
connecting, use the alternate code where provided.
Synchronizing Data
1. Tap Start - ActiveSync - Tools - Options - PC and deselect the Enable
synchronization when cradled using: check box to temporarily disable serial cable
detect before using ActiveSync.
2. Tap Start - ActiveSync - Tools - Options - PC and select the Include PC when
synchronizing remotely and connect to: check box to ensure the host computer you
wish to synchronize with is identified.
3. Tap Start - Settings - Connections tab - Connections icon.
Connecting to the Internet
Code Country
FD or 0A Greece
FD or 0F Iceland
16 Ireland
20 Italy
FD or 31 Liechtenstein
FD or 3C Luxembourg
FD or 3D Mexico
FD or 42 Netherlands
Synchronizing Data
on page 4-13).
Code
46 Norway
FD Portugal
FD or 57 Spain
FD or 59 Sweden
FD Switzerland
FD TBR-21
(Europe)
73 United
Kingdom
FD or 7B United States
Communications
on page 4-11) or you
Country Code
FD or 82
8B
FD or A0
FD or A5
FD or A6
FD
FD or B4
B5
(Default)
4-11