Using The Single-Slot Serial Cradle - Symbol PDT 8000 Series Product Reference Manual

PDT 8000 Series Product Reference Guide
Note: The serial charging cable requires a dedicated port. It cannot share
a port with an internal modem or other device. If you are unsure
about the location of the serial port on your computer, refer to the
user's manual supplied with the computer.
3. If this is your first synchronization, follow the instructions on the host computer
screen to setup the partnership. Items to be synchronized may be customized, and
you may select to synchronize continuously as information changes, upon
connection, or manually by clicking the Sync button on the toolbar of your host
computer.
Note: Every PDT 8000 terminal should have a unique device name. Never
try to synchronize more than one PDT 8000 terminal to the same
device name.
4. If you already created a partnership between your host computer and terminal,
synchronization will occur automatically, immediately following step 2.

Using the Single-Slot Serial Cradle

1. Install ActiveSync on your host computer.
2. Connect your CRD8000-1000S cradle to your host computer as shown below:
4-6
To serial port of
host computer