Defining Script Properties - Symbol PDT 8000 Series Product Reference Manual

PDT 8000 Series Product Reference Guide

Defining Script Properties

Before a script is created, the script properties must be defined. This defines the type of
terminal, flash type, number of disks being created, and the memory configuration of each
disk volume.
To define the script properties:
1. With TCM open, click on the Script Window to make it the active window.
2. Under the Script menu, select the Properties option.
OR
Click on
3. From the Terminal drop-down menu, select 8000-64M.
4. Verify that 40A-1F400Z is selected from the Flash Type drop-down menu.
5. From the Disks drop-down menu, select the number of disk volumes to be created.
11-6
from the tool bar. The Script Properties window displays.