I Set Mode Items - Icom IC-M602 Instruction Manual

I Set mode items

D D Scan type
The transceiver has 2 scan types: normal scan and priority
scan. Normal scan searches all tag channels in the selected
channel group. Priority scan searches all tag channels in se-
quence while monitoring Channel 16.
--Set Mode--
Scan Type
˘Priority
˘Normal
<ENT˘OK>
D D Scan resume timer
The scan resume timer can be selected as a pause (OFF) or
timer scan (ON). When OFF is selected, the scan pauses
until the signal disappears. When ON is selected, the scan
pauses 5 sec. and resumes even if a signal has been re-
ceived on any other channel than Channel 16.
--Set Mode--
Scan Timer
˘ON
˘OFF
<ENT˘OK>
D D Weather alert
A NOAA broadcast station transmits a weather alert tone be-
fore important weather information. When the weather alert
function is turned ON, the transceiver detects the alert, then
flashes the "WX ALERT" indicator until the transceiver is op-
erated. The previously selected (used) weather channel is
checked any time during standby or while scanning.
• "WX ALERT" appears instead of "WX" indication when the function
(Default: Normal)
D D Dual/Tri-watch of COMMANDMIC
This item sets the HM-127's [CH/WX•DW] key function as
dual watch or tri-watch.
(Default: OFF)
is set ON.
--Set Mode--
WX Alert
˘ON
˘ON with WX SCAN
˘OFF
<ENT˘OK>
(Appears when connecting HM-127)
--Set Mode--
Dual/Tri COMMANDMIC
˘Tri-watch
˘Dualwatch
˘OFF
˘Position Request
˘<ENT˘OK>
8
SET MODE
8
(Default: OFF)
(Default: Dualwatch)
51