I Connections - Icom IC-M602 Instruction Manual

I Connections

t
q ANTENNA CONNECTOR
Connects a marine VHF antenna with a PL-259 connector.
CAUTION:
Transmitting without an antenna may dam-
age the transceiver.
w HAILER/FOG HORN CONNECTOR
Connects to a hailer speaker.
HAIL (+)
e EXTERNAL MICROPHONE JACKS
Connects to optional HM-127
.
PHONE
CAUTION: NEVER
connect other microphones, such
as the HM-136, as this may cause damage to the transceiver.
q
w
e
r
HAIL (–)
NC
REMOTE-CONTROL MICRO-
CONNECTIONS AND MAINTENANCE
r GPS RECEIVER/EXTERNAL SPEAKER JACK
➥Connects to a GPS receiver for position and time indi-
cations.
• An NMEA0183 ver. 2.0 or 3.01 (sentence formatters RMC,
GGA, GNS, GLL) compatible GPS receiver is required. Ask
your dealer about suitable GPS receivers.
NMEAOUT (+)
NMEAOUT (–)
NMEAIN (–)
➥Connects to a PC or navigation equipment (NMEA0183
ver. 3.01 sentence formatters DSC, DSE compatible) for
plotting received other ships position data.
➥Connects to an external speaker.
t DC POWER CONNECTOR
Connects the supplied DC power cable from this connector
to an external 13.8 V DC power source.
CAUTION:
After connecting the DC power cable, cover
the connectors with a rubber vulcanising tape as shown
below, to prevent water seeping into the transceiver.
Rubber vulcanizing
tape
9
SP (+)
SP (–)
NMEAIN (+)
9
55