Set Mode; I Set Mode Programming - Icom IC-M602 Instruction Manual

8

SET MODE

I Set mode programming

Set mode is used to change the conditions of the trans-
ceiver's functions: scan type (normal or priority), scan resume
timer, weather alert, dual/tri-watch of COMMANDMIC, trans-
ceiver's beep tone, internal speaker, LCD contrast, RF atten-
uation level, automatic fog horn frequency, scrambler type
and scrambler code.
Available functions may differ depending on dealer setting.
• SET MODE CONSTRUCTION
Rotate
--Set Mode--
˘Scan Type
˘Scan Timer
˘WX Alert
˘Dual/Tri COMMANDMIC
˘Beep
˘Internal Speaker
˘Contrast
˘RF Attenuator
˘Foghorn Frequency
˘Scrambler Type
˘Scrambler Code
˘Exit
50
[CHANNEL] Push
Scan type
Scan type
Scrambler code
Scrambler
code
Scrambler type
Scrambler
type
q Turn power OFF.
w While pushing [16•9], turn power ON to enter set mode.
e After the display appears, release [16•9].
r Rotate [CHANNEL] to select the desired item, push [ENT].
Or push [16•9] to select the item when using an optional
HM-127.
t Rotate [CHANNEL] to select the desired condition of the
item. Use [Y Y ]/[Z Z ] when using an optional HM-127.
y Rotate [CHANNEL] to select "Exit," push [ENT] to exit
set mode and returns to normal operation condition
when using HM-127
Scan resume timer
Scan timer
Foghorn Foghorn Frequency Frequency
Internal speaker
not selectable when using HM-127.
Attenuation level
RF
Attenuator
Weather alert
WX Alert
Dual/tri-watch of COMMANDMIC
Dual/Tri COMMANDMIC
and
items are
Beep tone
Beep
LCD contrast
Contrast