I Distress Call - Icom IC-M602 Instruction Manual

I Distress call

A distress call should be transmitted, if in the opinion of the
Master, the ship or a person is in distress and requires imme-
diate assistance.
NEVER USE THE DISTRESS CALL WHEN
YOUR SHIP OR A PERSON IS NOT IN AN
EMERGENCY. A DISTRESS CALL CAN BE
USED ONLY WHEN IMMEDIATE HELP IS
NEEDED.
D D Simple call
q Confirm no distress call is being received.
w While lifting up the switch cover, push [DISTRESS] for 5
sec. to transmit the distress call.
• Emergency channel (Ch 70) is automatically selected and the
distress call is transmitted.
• When no GPS is connected, input your position and UTC time, if
possible.
Distress Call
Push for 5 sec.
e After transmitting the call, the transceiver waits for an ac-
knowledgment call on Ch 70.
• The distress call is automatically transmitted every 3.5 to 4.5
minutes.
Distress Call
TX Complete
Now Wating for ACK
<CLR˘Cancel ACK>
r After 2 sec., the transceiver is set to Channel 16 automat-
ically.
BUSY-25W---INT---CALL
LOCAL--DUP
SCRAM--TAG
NORMAL-SCAN
Wait ACK
-34"34.506N
<CLR˘
Cancel ACK---CALLING
6
DSC OPERATION
6
23