Icom IC-M602 Instruction Manual page 43

D D Transmitting Polling request call
Transmit a polling request call when you want to know a spe-
cific ship is in the communication area, etc.
q Push [MENU] to enter the DSC menu.
w Rotate [CHANNEL] to select "Polling Request,"
push [ENT].
--DSC Menu--
Select item
˘Individual Call
˘Group Call
˘All Ships Call
˘Position Request
˘Position Report
˘Polling Request
e Rotate [CHANNEL] to select the desired pre-programmed
individual address or "Manual Input," push [ENT].
• The ID code for the individual call can be set in advance. (p. 19)
• When "Manual Input" is selected, set the 9-digit ID code for
the individual you wish to call with the keypad.
--DSC Menu--
Select Address
˘Manual Input
˘John
˘Margaret
˘Ricky
<CLR˘Exit / ENT˘OK>
r Push [ENT] to transmit the polling request call.
--DSC Menu--
Polling Request Ready
˘<CLR˘Exit / ENT˘OK>
t After the polling request call has been transmitted, the fol-
lowing indication is displayed
--DSC Menu--
Polling Request
TX Complete
Now Waiting for ACK
˘
<CLR˘Exit>
y Push [CLR] to return to the previous indication before en-
tering DSC menu.
• Even if [CLR] hasn't been pushed, the display automatically re-
turns to the original indication after 2 sec. of inactivity.
6
DSC OPERATION
6
35