Icom IC-M602 Instruction Manual page 41

D D Transmitting Position report call
Transmit a position report call when you want to announce
your own position to a specific ship and to get an answer.
q Push [MENU] to enter the DSC menu.
w Rotate [CHANNEL] to select "Position Report,"
push [ENT].
--DSC Menu--
Select item
˘Individual Call
˘Group Call
˘All Ships Call
˘Position Request
˘Position Report
˘Polling Request
e Rotate [CHANNEL] to select the desired pre-programmed
individual address or "Manual Input," push [ENT].
• The ID code for the individual call can be set in advance. (p. 19)
• When "Manual Input" is selected, set the 9-digit ID code for
the individual you wish to call with the keypad.
--DSC Menu--
Select Address
˘Manual Input
˘John
˘Margaret
˘Ricky
<CLR˘Exit / ENT˘OK>
When a GPS receiver (NMEA0183 ver. 2.0 or 3.01) is con-
nected, next steps r, t (Current position/time program-
ming) do not appear. Go to step y.
r The position information appears. Set the current position,
then push [ENT].
• Edit the digit of your position data directly with the keypad.
• Push [6• MNO ] to edit N; North latitude or [7•
S; South latitude.
• Push [3• DEF ] to edit E; East longitude or [9•
W; West longitude.
• Rotate [CHANNEL] to move the cursor backward or forward.
• Push [CE] to clear the position data.
--DSC Menu--
Input Position
Latitude
˘ _°__.___N˘˘˘˘˘˘˘˘Null
Longitude
___°__.___W˘˘˘˘˘˘˘˘Null
<CE˘Null Data>
<CLR˘Exit / ENT˘OK>
6
DSC OPERATION
PRS ] to edit
WXY ] to edit
6
33