I Transmitting Dsc Calls - Icom IC-M602 Instruction Manual

I Transmitting DSC calls

D D Transmitting Individual call
The individual call function allows you to transmit a DSC sig-
nal to a specific ship only.
q Push [MENU] to enter the DSC menu.
w Rotate [CHANNEL] to select "Individual Call,"
push [ENT].
--DSC Menu--
Select item
˘Individual Call
˘Group Call
˘All Ships Call
˘Position Request
˘Position Report
˘Polling Request
e Rotate [CHANNEL] to select the desired pre-programmed
individual address or "Manual Input," push [ENT].
• The ID code for the individual call can be set in advance. (p. 19)
• When "Manual Input" is selected, set the 9-digit ID code for
the individual you wish to call with the keypad.
--DSC Menu--
Select Address
˘Manual Input
˘John
˘Margaret
˘Ricky
<CLR˘Exit / ENT˘OK>
r Rotate [CHANNEL] to select a desired intership channel
or "Manual Input," push [ENT].
• Intership channels are already preset into the transceiver in the
recommending order.
--DSC Menu--
Select Intership CH
˘08
˘69
˘77
˘06
˘
<CLR˘Exit / ENT˘OK>
6
DSC OPERATION
6
27