Dsc Operation; I Mmsi Code Programming; I Dsc Individual Id - Icom IC-M602 Instruction Manual

6

DSC OPERATION

I MMSI code programming

The 9-digit MMSI (Maritime Mobile Service Identity: DSC self
ID) code can be programmed at power ON.
This code programming can be performed only twice.
q Turn power OFF.
w While pushing [MENU], turn power ON to enter MMSI
code programming condition.
e After the display appears, release [MENU].
r Push [MENU] to enter the DSC menu.
t Rotate [CHANNEL] to select "Set up," push [ENT].
y Rotate [CHANNEL] to select "MMSI check," push [ENT].
MMSI Check
˘ä________
________
<CLR˘Exit / ENT˘OK>
u Edit the specific MMSI code directly with the keypad.
• Rotate [CHANNEL] to move the cursor backward or forward.
i Input the 9 digit code, then push [ENT] to set the code.
• Returns to DSC set up menu.
o Rotate [CHANNEL] to select "Exit," push [ENT].
• Returns to DSC menu.
• Repeat again to return to the normal operation condition.
18
--DSC Menu--

I DSC individual ID

A total of 100 DSC address IDs can be programmed and
named with up to 10 characters.
D D Programming Address ID
q Push [MENU] to enter the DSC menu.
w Rotate [CHANNEL] to select "Set up," push [ENT].
--DSC Menu--
Select item
˘Position Report
˘Polling Request
˘Received Calls
˘Distress Setting
˘Set up
˘Exit
e Rotate [CHANNEL] to select "Add: INDV
[ENT].
--DSC Menu--
Set up
˘Add:INDV ID
˘Add:Group ID
˘DEL:INDV ID
˘DEL:Group ID
˘Offset time
˘MMSI Check
ID," push