Interrupt Copy - Kyocera TASKalfa 2550ci Operation Manual

Interrupt Copy

This function allows you to pause the current jobs in progress when you need to make copies immediately.
When the interruption copy ends, the machine resumes the paused print jobs.
NOTE:
If the machine is left idle for a certain period of time in Interrupt Copy mode, Interrupt Copy will be
cancelled and the job that was interrupted will resume. Change the delay as required. For more information,
refer to Interrupt Clear Timer on page 9-79.
Copy Image
Copy Image
Place original.
Auto
Paper
Original : ---
Original : A4
Selection
Zoom : 100%
Zoom : 100%
Paper : --- 1-sided
Paper : A4
>>1-sided
Preview
Duplex
Preview
Quick Setup Org./Paper/ Color/
Finishing Image Quality
Status
Copies
Shortcut 1
Shortcut 2
Shortcut 3
100% Normal 0
Shortcut 4
Zoom Density
Shortcut 5
Off Off
Shortcut 6
Combine Staple
Layout/Edit Advanced Program
Setup
12/12/2011 10:10
1
Press the Interrupt key.
The current print job is temporarily interrupted.
2
Place the originals onto the machine for interrupt
copy, and configure the copy settings.
3
Press the Start key to start interrupt copying.
4
When interrupt copying ends, press the Interrupt
key.
The machine resumes the paused print jobs.
3-18
Basic Operation