Kyocera TASKalfa 2550ci Operation Manual page 296

Removing the USB Memory
There is a way to remove the USB memory safely.
Use the procedure below to remove the USB memory.
Status
Scanner
Ready.
Printer
Ready.
Removable Memory
1GB 4 GB /
Format Remove
FAX Port 1
Dialing...
Line Off Manual RX
FAX Log
Printing Jobs Sending Jobs
Status
Canceling FAX Communication
Cancel fax communication.
Use the procedure below to cancel the fax communication.
Status
Scanner
Ready.
Printer
Ready.
Removable Memory
Not connected.
Format Remove
FAX Port 1
Dialing...
Line Off Manual RX
FAX Log
Printing Jobs Sending Jobs
Status
Hard Disk
Overwriting...
FAX Port 2
Receiving...
Line Off
i-FAX Check New FAX
Device/
Storing Jobs Paper/Supplies
Communication
12/12/2011 10:10
Hard Disk
Overwriting...
FAX Port 2
Receiving...
Line Off
i-FAX
Check New FAX
Storing Jobs Device/
Paper/Supplies
Communication
12/12/2011 10:10
1
Press the Status/Job Cancel key.
NOTE:
In the event that an error appears on the
touch panel, press [Hold] to display the status screen
and check the job details screen.
2
Press [Device/Communication] > [Remove] in
Removable Memory.
3
When Removable memory can be safely removed.
is displayed, remove the USB memory.
1
Press the Status/Job Cancel key.
NOTE:
In the event that an error appears on the
touch panel, press [Hold] to display the status screen
and check the job details screen.
2
Press [Device/Communication] > [Line Off] in FAX
Port 1 or FAX Port 2.
3
Press [Yes] in the confirmation screen. The line is
disconnected, and the fax communication is
canceled.
8-16
Status / Job Cancel