Send And Forward - Kyocera TASKalfa 2550ci Operation Manual

Default Screen
Use this procedure to set the default screen displayed when you press the Send key.
The table below shows the available settings.
Item
Destination
Address Book
Use the procedure below to set the default send screen.
1
Press the System Menu key.
2
Press [Send] and then [Change] of Default Screen.
3
Press [Destination] or [Address Book].
4
Press [OK].

Send and Forward

You can set whether transmission copies are forwarded to a specified address when documents are sent. The
table below shows the available settings.
• Forward
• Destination
• Color Setting
• Scan Resolution
Forward
Set whether or not transmission copies are forwarded. The table below shows the available settings.
Item
Off
On
Use the procedure below to set the settings for Forward.
1
Press the System Menu key.
2
Press [Send] > [Next] of Send and Forward > [Change] of Forward.
3
Select [Off] or [On].
4
If you selected [On], select the conditions for forwarding. When [E-mail] is selected, a copy of the message
is forwarded each time an e-mail is sent.
5
Press [OK].
Displays the destination screen when the Send key is pressed
(screen for sending).
Displays the address book when the Send key is pressed
• File Format
• File Separation
• E-mail Subject
• FTP Encrypted TX
Do not forward transmission copies.
Forward transmission copies.
9-47
Default Setting (System Menu)
Detail
Detail
9