Scanning Using Twain - Kyocera TASKalfa 2550ci Operation Manual

Scanning using TWAIN

This section explains how to scan an original using TWAIN. The machine's TWAIN/WIA can be used for two
types of scanning: scanning a document placed in the machine, and scanning a document that has been stored
in a custom box.
The procedure for scanning using the TWAIN driver is explained as an example. The WIA driver is used in the
same way.
Scanning a document placed in the machine
The settings that appear in the TWAIN dialog box are as follows.
Item
Basic Original Size
Feed Method
Original
Orientation
Sending Size
1
2
3
This setting sets the size of the scan area. The available sizes vary based
on the scanner model and the size of the original.
This setting specifies the feed method of the original. Select the feed
method from the list.
This setting specifies the orientation of the original.
This setting specifies the image size. The available sizes vary based on the
scanner model and the scan area selected in the preview pane.
6-32
Activate the TWAIN compatible application.
Select the machine using the application and
display the TWAIN dialog box.
NOTE:
For selecting the machine, see the
Operation Guide or Help for each application
software.
Select scanning settings in the TWAIN dialog box
that opens.
Detail
Sending Functions