Count By Paper Size - Kyocera TASKalfa 2550ci Operation Manual

User Login/Job Accounting - Each Job Accounting
Maintain a separate counter for each account (department).
Sort
Account Name
06 Account 00006000
Detail
Status
06 Account
Account:
Printed Pages:
Check
FAX Transmission Pages:
2(20)
Counter Reset:
Start
Status

Count by Paper Size

This counts the number of pages by paper size (e.g. Letter).
NOTE:
Paper size is available in five types, - 1 to 5. These types are specified in accounting reports. Refer
to Print Accounting Report on page 10-32.
In addition to paper size, media type can also be specified (e.g. count the letter-size color paper used). If no
media type is specified, usage is counted for all media types of that size.
Use the procedure below to count the number of pages.
Name
Account ID
Search(Name)
Search(ID)
2/2
Other Account
Close
12/12/2011 10:10
Scanned Pages: Check
FAX Transmission Time:
0:00:10
Close
12/12/2011 10:10
5
Select the account to check the count.
NOTE:
Select [Name] or [ID] from the Sort pull-
down menu to sort the account names.
Press [Search(Name)] or [Search(ID)] to search by
account name or account ID.
To display an account other than your own account,
press [Other Account].
6
Press [Detail].
7
Press [Check] at the function to check the count.
The results will be displayed.
8
Confirm the count and press [Close].
9
Press [Start] of Counter Reset to reset the counter.
10
Press [Yes] on the screen to confirm the reset. The
counter will be reset.
1
Press the System Menu key.
2
Press [User Login/Job Accounting].
3
If the user authentication screen appears, enter
your login user name and password and then press
[Login]. For this, you need to login with
administrator privileges. The login user name and
login password are both set to "2500" in the factory
default state.
4
Press [Next] of Job Accounting Setting, [Next] of
Default Setting, [Next] of Count by Paper Size,
[Change] of Paper Size 1 to 5 and then [On].
10-30
Management