Multipoint Videoconferencing; Placing A Mutlipoint Call - Polycom VIEWSTATION Training Manual

Hide thumbs Also See for VIEWSTATION:

Table of Contents

End-User Training Guide: ViewStation

MULTIPOINT VIDEOCONFERENCING

3. Once the call is connected, press the CALL•HANG-UP button on the

Remote to get to the Call Hangup Choices Screen. Highlight the ADD A

VIDEO CALL icon.

4. Repeat this process until all the sites are connected.

Tips & Tricks #7-10

Here's something helpful to make setting up a multipoint

videoconference when using your ViewStation MP!

A maximum of (3) sites at 256 kbps or (4) sites at 128 kbps may be

used if 512 kbps capability is accessed on the ViewStation.

On a dual monitor system the initiator of the call will be able to see both

sites during a (3) point call.

A red indicator on the camera icon will appear when someone is

viewing your site during a multipoint conference.

#10 You cannot control the far-end camera when you are in a multipoint.

Placing A Multipoint Call

(If you have a ViewStation MP)

1. From the Main Calling Screen,

highlight the VIDEO CALL icon and

press the SELECT button on the

Remote Control.

2. Enter the number of the first party

in your call in the Video Phone

Screen and change the speed of

your call if necessary. All multipoint

calls must be connected at the

same speed. Then press the

CALL•HANG-UP button on the

Remote to place the call.

VSGi - Polycom ViewStation End-user Training Guide

For more

information

call

408-402-9000

Table of Contents