Placing An Ip Video Call - Polycom VIEWSTATION Training Manual

End-User Training Guide: ViewStation

Placing an IP Video Call

1. Use the arrow buttons on the Remote Control and move to the Video Call
Box.
2. Press the SELECT button (the oval button in the center of arrows).
3. The Video Phone Screen will appear.
4. Using the numeric keypad on your Remote, enter the IP Address of the
ViewStation you are calling. IMPORTANT: To type ".", press the right
arrow button.
5. Press the SELECT button after numbers are entered to place call.
The System Information Screen will provide your ViewStation's IP address.
VSGi - Polycom ViewStation End-user Training Guide
For more
information
call
408-402-9000
7