Placing A Multipoint Call; (Three Or More Video Sites At One Time); Multipoint Videoconferencing - Polycom VIEWSTATION Training Manual

Hide thumbs Also See for VIEWSTATION:

Table of Contents

End-User Training Guide: ViewStation

Placing a Multipoint Call

A multipoint video call must be connected through an external device called a

video bridge. If you do not have a video bridge at your company, you must

use a bridge service provider for these calls. In most cases, service providers

require certification of each unit involved in the call as well as 48 hours notice

for the reservation.

Tips & Tricks #11-15

Here are some general multipoint videoconferencing tips.

#11 All sites should be certified with the bridging service.

It is suggested that the certifications be completed

prior to the first scheduled bridge call.

#12 Continuous Presence requires a specific feature on the bridge. If you

are interested in conducting your conference via this method you must

specifically request it at the time the call is scheduled with the bridge

service.

#13 It is recommended that a test call be conducted prior to the conference.

#14 Upon calling into the bridge for your conference, identify your site and

confirm that you have a clean connection.

#15 Ensure that your microphone is muted if you are not the current

speaker.

VSGi - Polycom ViewStation End-user Training Guide

For more

information

call

408-402-9000

Table of Contents